The Fitting Room · Our Process

How we work · Since 1999

Every garment takes the same careful route through the room.

From the first pin to the final press, your piece moves through six stages — each one checked, written on the docket and signed off before it goes to the next. No guesswork, no rushed hems, no surprises at collection.

Good alterations are mostly patience. We measure twice, pin on the body, and never send a garment out of the room until it's been tried on, checked and pressed.

1999
Established
06
Stages
02
Studios

The process

Six stages, one room.

Whether it's a trouser hem or a bridal gown, the order never changes. What changes is how much time we give each stage.

  1. Stage 01 · Around 2 minutes

    Book or walk in

    Everyday alterations can be dropped in during opening hours. For suits, formalwear and bridal, book a fitting so we can set aside proper time — nothing gets squeezed between other appointments.

    YouVisit our Pacific Fair studio and bring the garment.
    UsHold the time and note what you're coming in for.
  2. Stage 02 · 15–20 minutes

    Consult & measure

    You try the garment on and we look at how it sits — shoulders, waist, seat, length — and talk about how and when you'll wear it. If a change won't give you the result you want, we'll tell you honestly.

    YouWear it as you would on the day, ideally with the right shoes.
    UsAssess the cloth and construction, and what's possible within the seams.
  3. Stage 03 · On the body

    Pin & mark

    Every adjustment is pinned and chalked on you, not on a hanger. The agreed changes go onto your work docket, and you leave with a quote and a ready date before anything is unpicked.

    YouCheck the pinned fit in the mirror and confirm the plan.
    UsWrite the docket — measurements, work, price and ready date.
  4. Stage 04 · Behind the counter

    The workroom

    Your garment is ticketed and matched to the tailor best suited to its fabric. Seams are unpicked, recut and sewn on industrial machines, with hand-finishing wherever a stitch will show.

    YouNothing — we'll contact you if anything changes.
    UsMatch thread, keep original details, follow the docket line by line.
  5. Stage 05 · Quality control

    Check & press

    Before it's bagged, the garment is measured against the docket, loose threads are trimmed, and it's pressed with the right heat and cloth for the fabric — wool, silk, linen or leather.

    YouGet a call or message when it's ready.
    UsSecond-check every line on the docket before sign-off.
  6. Stage 06 · Collection

    Final fitting & collection

    Try it on again before you take it home. If something needs a touch more, we'll note it and put it right — the docket isn't closed until you're happy with how it fits.

    YouTry it on, move in it, sit down in it.
    UsFinal adjustments, then it leaves the room.

Inside the workroom

Where stage four happens.

Experienced tailors, industrial machines and the patience to finish by hand. The same bench handles a jeans hem and a designer jacket — the care is what stays constant.

Industrial machines

Lockstitch, overlock and blind-hem machines built for consistent tension on everything from fine silk to heavy denim.

Hand finishing

Hems, linings, buttonholes and beadwork that will be seen are finished by hand, so the alteration disappears into the garment.

Fabric-specific pressing

Every cloth has its own heat, steam and pressing cloth. Getting the press right is half of what makes an alteration look original.

On the benchSuitingBridalDesignerDenimLeatherKnitwearUniforms

Working to a date?

Plan it backwards from the day.

Pick what you're bringing in and when you need it. We'll show you when to come in so every stage has the time it needs — without a last-minute rush.

01 · What are you bringing?

Choose a date to see your timeline.

A guide only — your studio will confirm timing at your consult. Busy seasons (formals, spring weddings) book out early.

Before your fitting

What to bring along.

A few small things make the consult and pinning far more accurate. Tick them off as you go.

0 of 5 ready

Our standards

Four things we don't skip.

No. 01

Pinned on you

Fit is judged on the body, standing and moving — never from a tape measure alone.

No. 02

Written down

Every job has a docket: the work, the price and the ready date, agreed before we start.

No. 03

Checked twice

Measured against the docket and pressed properly before it's bagged for you.

No. 04

Tried on again

The final fitting is part of the job — not an extra. The docket closes when you're happy.

Questions

About the process.

Not for everyday alterations — you can walk in during opening hours. For suits, formalwear and bridal, we recommend booking so we can give the consult and pinning the time it needs.

It depends on the garment and how busy the workroom is. You'll get a confirmed ready date at your consult, written on your docket before any work begins.

That's what the final fitting is for. Try it on in the studio — if anything needs adjusting, we'll note it and put it right.

Yes. The price is agreed and written on your docket at the pinning stage, before anything is unpicked or cut.

Please ask at your consult — your garment is ticketed to the studio where it was pinned, so collection is usually from the same location.

Start at stage one

Bring it in. We'll take it from here.

Two studios, the same process. Book a fitting or drop in during opening hours.